Radio controls

Radio receiver wall switch 1-channel

is used for manual control of one or a series of 230 V drives ...mehr lesen

The 1-channel wall-mounted radio receiver is used to manually control one or a series of 230 V drives. Local operation is carried out using the three front buttons (OPEN/STOP/CLOSE). The red LED indicator light on the front of the device signals the following statuses:

permanently lit
The appliance is ready for operation
flashes
A movement command is being processed
Does not light up
The device is in learning mode

Example of Use 3

Control of 24 V drives with HAUTAU interface
Router operated using WPS integration in the wireless access point
Separate operation of 31 drives with wireless access point using ConfigTool
All windows automatically closed in the event of a wind/rain signal via the locking input on the wireless access point
Power supplied via power adapter

Example of Use 4

Control of VENTRA 301 E/N window fans
Router operated using WPS integration in the wireless access point
Separate operation of 31 VENTRAs with a wireless access point using ConfigTool
Power supplied to wireless access point via the 24 V interface on a VENTRA 301 E/N

Example of Use 1

Control of 24 V drives with HAUTAU interface
Direct connection without router operation
Replaces conventional remote control
Separate operation of 31 drives with wireless access point using ConfigTool

Example of Use 2

Control of 230 V drives; model: PRIMAT E kompakt 195
Direct connection without router operation
Replaces conventional remote control
Separate operation of 31 drives with a wireless access point using ConfigTool
Power supplied to wireless access point via a PRIMAT E kompakt 195 drive
Separate operation of the wireless access point via the 24 V interface on a drive

+49 5724 / 393-0

Wilhelm-Hautau-Straße 2

Radio controls

Radio receiver wall switch 1-channel

Radio receiver wall switch 1-channel

Example of Use 3

Example of Use 4

Example of Use 1

Example of Use 2

Other products